SM100SL Starlink Remote Boat Monitoring System
$1,675.00
Model SM100SL Trek Transponder connects to your on board Starlink Mini by WiFi and allows global monitoring of your boat.
You can connect up to two HD cameras to this unit. Cameras are invaluable for seeing in detail the cause of an alarm on board, as well as who is on board.
Simply connect the SM100SL to your boats batteries, add bilge float switches, cameras and connect to your Starlink Mini and the unit is immediately monitoring your boat and its location, and can send alarms and pictures to your phone .
You can also add invisible under deck Space Guard or PIR intruder sensors or door switches to monitor security, temperature sensor for fridge and any compatible siren/flashing light.
Early warning of problems and knowing what they are gives you the opportunity to solve those problems before they become expensive, disasters or insurance claims.
This model Trek Transponder also features fully automatic periodic sending of status reports or camera images, selectable from hourly to 24 hourly.
Trek Transponder SM100SL has three output relays, one is automatic and triggered by security inputs and is intended for sirens or flashing lights. The second two are manually controllable and can be used for pumps, deck lights and many applications. Use PA3050 Power Relay to switch loads up to 50A.
Trek Transponder SM100SL operates from 12V or 24V and draws only 0.05A so is easy to install on most boats. Standby power use is so low its no problem for boats relying on solar power.
Trek Transponder is Australian Made and has a 1-year warranty
Starlink is product owned by SpaceX (Space Exploration Technologies Corp USA)
* Specifications subject to change due to ongoing development.
*Â Trek Transponder is not a substitute for proper boat care and maintenance but is an aid!
Â
Description
Trek Transponder SM100SL Specifications
- Simply connect SM100SL to your Starlink Mini, activate your plan and monitor your boat globally
- Wireless WiFi connection to Starlink Mini
- Two HD cameras can be connected to this Trek Transponder
- GPS Built in Geofence (alarm if boat moves outside designated area)
- 12V or 24V Operation
- 4 Battery Bank Monitor Inputs
- 2 Bilge Float Switch Input
- 2 PIR Movement Detector inputs
- 3 Hatch / Door Entry inputs
- 2 6V Power output for Sensors (12V optional)
- Fridge Temperature Input: -25 to +105 Deg C
- 1 Shore Power Input
- 2 Manual relay output (often used for deck lights or fridge on/off))
- 1 Triggerable relay output (often used for siren)
- Inputs and Outputs can be renamed (ie ENT1 to Saloon)
- Input OK/Alarm can be inverted (ie NO to NC)
- Built in Pitch and Roll motion sensor (detects boat listing or high seas)
- Automatic periodic reporting from hourly to 24 hourly
- Optional External GPS and External 4G Antenna option
- Optional 90dB Buzzer on-board acoustic alarm
- Anchor Watch for cruising
Front Panel Indications
- No
Outputs
- 1 x Solid State Automatic Relay (10 minute contact closure triggered by PIR and Entry Inputs for Siren):Â Â 4A 30VDCÂ N.O. contact
- 2 x Solid State Manual Relay (controlled by SMS):Â 4A 30VDCÂ N.O. contact
- Sensor Power: 2 x 6V (12V optional) regulated over 9V to 30V input voltage range
Power
- Operating voltage: 8V to 32VÂ Â (12V 24V systems automatically detected)
- Operating power: < 0.050A while monitoring on standby
GPSÂ
- Antenna: Built in, external optional
- Channels: 48, parallel tracking
- Correlators: 400,000
- Frequency: L1 (1575MHz)
- Horizontal Accuracy (with ext antenna): < 3m
PhysicalÂ
- Size: 171x121x55mm
- Case Material: Polycarbonate
- Mounting:Flange left and right side
- Cable terminations:Screw terminal strip
- Operating Temperature: 0 – 70 Deg C
- Weight: 300g
Communications
- Antennas: Built in, external optional
- WiFi to Starlink Terminal
Related products
-
SM100HD Boat Alarm System
$1,475.00 -
Boat Alarm Camera SD
$215.00
