Skip to content

SM100HD Boat Alarm System

$1,675.00

You can connect two HD cameras to this Trek Transponder. Cameras are invaluable for seeing in detail the cause of an alarm on board, as well as who is on board. SM100HD sends a fast sequence of full HD camera images from your boat on alarm or on request. Camera imaging is x4 faster than SM100B models.

Simply connect the SM100HD to your boats batteries, add bilge float switches, cameras and plug in an Aldi, Telstra or Vodafone SIM card and the unit is immediately monitoring your boat and its location, and can send alarms and pictures to your phone and up to 5 others by SMS. This model Trek Transponder can also call you if there is an alarm in case you are worried about sleeping through an SMS or are in a noisy environment.

SM100HD is fitted with Bluetooth for Android so you can operate Trek Transponder without a phone network. (Not camera images).

Optional expansion is available for SM100HD to four camera ports (SM100HD4) or six camera ports (SM100HD6). SM100HD imaging is x4 faster than SM100B models.

You can also add invisible under deck Space Guard or PIR intruder sensors or door switches to monitor security, temperature sensor for fridge and any compatible siren/flashing light.

Early warning of problems and knowing what they are gives you the opportunity to solve those problems before they become expensive, disasters or insurance claims.

This model Trek Transponder also features fully automatic periodic sending of status reports or camera images, selectable from hourly to 24 hourly.

Trek Transponder SM100HD has three output relays, one is automatic and triggered by security inputs and is intended for sirens or flashing lights. The second pair are manually controllable by SMS from your phone and can be used for pumps, deck lights and many applications. Use PA3050 Power Relay to switch loads up to 50A.

Trek Transponder SM100HD operates from 12V or 24V and draws less than 1W so is easy to install on most boats. Standby power use is so low its no problem for boats on moorings.

Trek Transponder is Australian Made and has a 1-year warranty.

* Specifications subject to change due to ongoing development.

*  Trek Transponder is not a substitute for proper boat care and maintenance but is an aid!

 

Category:

Description

  • Two HD cameras (1080×1920) can be connected to this Trek Transponder
  • Camera imaging x4 faster than SM100B models
  • Includes Bluetooth for Android (not photos)
  • Sends a fast sequence of full HD images automatically on alarm
  • 4G Ready (Aldi SIM included – Telstra network)
  • GPS Built in Geofence (alarm if boat moves outside designated area)
  • 12V or 24V Operation
  • 4 Battery Monitor Inputs
  • 2 Bilge Float Switch Inputs
  • 2 PIR Movement Detector inputs
  • 3 Hatch / Door Entry inputs
  • 2 6V Power outputs for PIRs (12V optional)
  • Fridge Temperature Input: -25 to +105 Deg C
  • 1 Shore Power Input
  • 2 Manual relay output (often used for deck lights or fridge on/off))
  • 1 Auto Triggerable relay output (often used for siren)
  • Inputs and Outputs can be renamed (ie ENT1 to Saloon)
  • Input OK/Alarm can be inverted (ie NO to NC)
  • Built in Pitch and Roll motion sensor (detects boat listing or high seas)
  • Auto dial will call you as well as SMS you if there is an alarm (wake you at night)
  • Automatic periodic reporting from hourly to 24 hourly
  • Works with Aldi, Telstra, TPG and Vodafone (or Hologram International on special order)
  • Optional External GPS and External 4G Antenna
  • Optional 90dB Buzzer on-board acoustic alarm
  • Anchor Watch for cruising
  • SM100HD4, up to 4 camera ports, add $223, SM100HD6, up to 6 camera ports, add $327

Front Panel Indications

  • Yes

Outputs

  • 1 x Solid State Automatic relay (10minute contact closure triggered by PIR and Entry):   4A 30VDC  N.O. contact
  • 2 x Solid State Manual Relay (controlled by SMS):  4A 30VDC  N.O. contact
  • PIR Power: 2 x 6V (12V optional) regulated over 8V to 32V input voltage range

Power

  • Operating voltage: 8V to 32V   (12V 24V systems automatically detected)
  • Operating power: < 1W

GPS 

  • Antenna: Built in, external optional
  • Channels: 48, parallel tracking
  • Correlators: 400,000
  • Frequency: L1 (1575MHz)
  • Horizontal Accuracy (with ext antenna): < 3m

Physical 

  • Size: 171x121x55mm
  • Case Material: Polycarbonate
  • Mounting:Flange left and right side
  • Cable terminations:Screw terminal strip
  • Operating Temperature: 0 – 70 Deg C
  • Weight: 300g

Communications

  • Antennas: Built in, external optional
  • 4G
  • Bluetooth for Android

* Specifications subject to change due to ongoing development.

*  Trek Transponder is not a substitute for proper boat care and maintenance but is an aid!

Back To Top
Your Cart

Your cart is empty.